Bah fais comme jt'ai dit , retélécharges et si t'arrives pas, voici c'que c'est le fichier en question pour mon tuto (jt'ai mis la ligne en question en rouge et j'en ai changé une autre en jaune mais c'est pas la peine) (j'ai mis le contenu en deux parties pasque c'est trop gros)pis n'oublies pas d'installer wamp dans C:\
@echo off
REM ##############################################
REM ## L2JDP Database Installer - (by DrLecter) ##
REM ##############################################
REM ## Interactive script setup - (by TanelTM) ##
REM ##############################################
REM Copyright (C) 2007 L2J DataPack
REM This program is free software; you can redistribute it and/or modify
REM it under the terms of the GNU General Public License as published by
REM the Free Software Foundation; either version 2 of the License, or (at
REM your option) any later version.
REM
REM This program is distributed in the hope that it will be useful, but
REM WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
REM or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
REM for more details.
REM
REM You should have received a copy of the GNU General Public License along
REM with this program; if not, write to the Free Software Foundation, Inc.,
REM 675 Mass Ave, Cambridge, MA 02139, USA. Or contact the Official L2J
REM DataPack Project at
http://www.l2jdp.com, http://forum.l2jdp.com or
REM #l2j-datapack @
irc://irc.freenode.netset config_file=vars.txt
set config_version=0
set workdir="%cd%"
set full=0
set stage=0
set logging=0
set upgrade_mode=0
set backup=.
set logdir=.
set safe_mode=1
set cmode=c
set fresh_setup=0
:loadconfig
title L2JDP installer - Reading configuration from file...
cls
if not exist %config_file% goto configure
ren %config_file% vars.bat
call vars.bat
ren vars.bat %config_file%
call :colors 17
if /i %config_version% == 1 goto ls_section
set upgrade_mode=2
echo It seems to be the first time you run this version of
echo database_installer but I found a settings file already.
echo I'll hopefully ask this questions just once.
echo.
echo Configuration upgrade options:
echo.
echo (1) Import and continue: I'll read your old settings and
echo continue execution, but since no new settings will be
echo saved, you'll see this menu again next time.
echo.
echo (2) Import and configure: This tool has some new options
echo available, you choose the values that fit your needs
echo using former settings as a base.
echo.
echo (3) Ignose stored settings: I'll let you configure me
echo with a fresh set of default values as a base.
echo.
echo (4) View saved settings: See the contents of the config
echo file.
echo.
echo (5) Quit: Did you came here by mistake?
echo.
set /P upgrade_mode="Type a number, press Enter (default is '%upgrade_mode%'): "
if %upgrade_mode%==1 goto ls_section
if %upgrade_mode%==2 goto configure
if %upgrade_mode%==3 goto configure
if %upgrade_mode%==4 (cls&type %config_file%&pause&goto loadconfig)
if %upgrade_mode%==5 goto :eof
goto loadconfig
:colors
if /i "%cmode%"=="n" (
if not "%1"=="17" ( color F ) else ( color )
) else ( color %1 )
goto :eof
:configure
call :colors 17
title L2JDP installer - Setup
cls
set config_version=1
if NOT %upgrade_mode% == 2 (
set fresh_setup=1
set mysqlBinPath=C:\wamp\mysql\binset lsuser=root
set lspass=
set lsdb=l2jdb
set lshost=localhost
set gsuser=root
set gspass=
set gsdb=l2jdb
set gshost=localhost
set cmode=c
set backup=.
set logdir=.
)
set mysqlPath=C:\wamp\mysql\bin\mysql.exeecho New settings will be created for this tool to run in
echo your computer, so I need to ask you some questions.
echo.
echo 1-MySql Binaries
echo --------------------
echo In order to perform my tasks, I need the path for commands
echo such as 'mysql' and 'mysqldump'. Both executables are
echo usually stored in the same place.
echo.
if "%mysqlBinPath%" == "" (
set mysqlBinPath=use path
echo I can't determine if the binaries are available with your
echo default settings.
) else (
echo I can try to find out if the current setting actually works...
echo.
echo %mysqlPath%
)
if not "%mysqlBinPath%" == "use path" call :binaryfind
echo.
path|find "MySQL">NUL
if %errorlevel% == 0 (
echo I found MySQL is in your PATH, this will be used by default.
echo If you want to use something different, change 'use path' for
echo something else.
set mysqlBinPath=use path
) else (
echo Look, I can't find "MYSQL" in your PATH environment variable.
echo It would be good if you go and find out where "mysql.exe" and
echo "mysqldump.exe" are.
echo.
echo If you have no idea about the meaning of words such as MYSQL
echo or PATH, you'd better close this window, and consider googling
echo and reading about it. Setup and host an L2J server requires a
echo minimum of technical skills.
)
echo.
echo Write the path to your MySQL binaries (no trailing slash needed):
set /P mysqlBinPath="(default %mysqlBinPath%): "
cls
echo.
echo 2-LoginServer settings
echo --------------------
echo I will connect to the MySQL server you specify, and setup a
echo Loginserver database there, most people use a single MySQL
echo server and database for both Login and Gameserver tables.
echo.
set /P lsuser="MySQL Username (default is '%lsuser%'): "
set /P lspass="Password (will be shown as you type, default '%lspass%'): "
set /P lsdb="Database (default is '%lsdb%'): "
set /P lshost="Host (default is '%lshost%'): "
if NOT "%lsuser%"=="%gsuser%" set gsuser=%lsuser%
if NOT "%lspass%"=="%gspass%" set gspass=%lspass%
if NOT "%lsdb%"=="%gsdb%" set gsdb=%lsdb%
if NOT "%lshost%"=="%gshost%" set gshost=%lshost%
echo.
echo 3-GameServer settings
echo --------------------
set /P gsuser="User (default is '%gsuser%'): "
set /P gspass="Pass (default is '%gspass%'): "
set /P gsdb="Database (default is '%gsdb%'): "
set /P gshost="Host (default is '%gshost%'): "
echo.
echo 4-Misc. settings
echo --------------------
set /P cmode="Color mode (c)olor or (n)on-color, default %cmode% : "
set /P backup="Path for your backups (default '%backup%'): "
set /P logdir="Path for your logs (default '%logdir%'): "
:safe1
set safemode=y
set /P safemode="Debugging messages and increase verbosity a lil bit (y/n, default '%safemode%'): "
if /i %safemode%==y (set safe_mode=1&goto safe2)
if /i %safemode%==n (set safe_mode=0&goto safe2)
goto safe1
:safe2
echo.
if "%mysqlBinPath%" == "use path" (
set mysqlBinPath=
set mysqldumpPath=mysqldump
set mysqlPath=mysql
) else (
set mysqldumpPath=%mysqlBinPath%\mysqldump.exe
set mysqlPath=%mysqlBinPath%\mysql.exe
)
echo @echo off > %config_file%
echo set config_version=%config_version% >> %config_file%
echo set cmode=%cmode%>> %config_file%
echo set safe_mode=%safe_mode% >> %config_file%
echo set mysqlPath=%mysqlPath%>> %config_file%
echo set mysqlBinPath=%mysqlBinPath%>> %config_file%
echo set mysqldumpPath=%mysqldumpPath%>> %config_file%
echo set lsuser=%lsuser%>> %config_file%
echo set lspass=%lspass%>> %config_file%
echo set lsdb=%lsdb%>> %config_file%
echo set lshost=%lshost% >> %config_file%
echo set gsuser=%gsuser%>> %config_file%
echo set gspass=%gspass%>> %config_file%
echo set gsdb=%gsdb%>> %config_file%
echo set gshost=%gshost%>> %config_file%
echo set logdir=%logdir%>> %config_file%
echo set backup=%backup%>> %config_file%
echo.
echo Script setup complete, your settings were saved in the
echo '%config_file%' file. Remember: your passwords are stored
echo as clear text.
echo.
echo press any key to continue...
pause> nul
goto loadconfig
:ls_section
cls
call :colors 17
set cmdline=
set stage=1
title L2JDP installer - Login Server database setup
echo.
echo Trying to make a backup of your loginserver database.
set cmdline="%mysqldumpPath%" --add-drop-table -h %lshost% -u %lsuser% --password=%lspass% %lsdb% ^> "%backup%\loginserver_backup.sql" 2^> NUL
%cmdline%
if %ERRORLEVEL% == 0 goto lsdbok
REM if %safe_mode% == 1 goto omfg
:ls_err1
call :colors 47
title L2JDP installer - Login Server database setup ERROR!!!
cls
echo.
echo Backup attempt failed! A possible reason for this to
echo happen, is that your DB doesn't exist yet. I could
echo try to create %lsdb% for you, or maybe you prefer to
echo proceed with the GameServer part of this tool.
echo.
:ls_ask1
set lsdbprompt=y
echo ATTEMPT TO CREATE LOGINSERVER DATABASE:
echo.
echo (y)es
echo.
echo (n)o
echo.
echo (r)econfigure
echo.
echo (q)uit
echo.
set /p lsdbprompt= Choose (default yes):
if /i %lsdbprompt%==y goto lsdbcreate
if /i %lsdbprompt%==n goto gs_backup
if /i %lsdbprompt%==r goto configure
if /i %lsdbprompt%==q goto end
goto ls_ask1
:omfg
cls
call :colors 57
title L2JDP installer - potential PICNIC detected at stage %stage%
echo.
echo There was some problem while executing:
echo.
echo "%cmdline%"
echo.
echo I'd suggest you to look for correct values and try this
echo script again later. But maybe you'd prefer to go on now.
echo.
if %stage% == 1 set label=ls_err1
if %stage% == 2 set label=ls_err2
if %stage% == 3 set label=gs_backup
if %stage% == 4 set label=gs_err1
if %stage% == 5 set label=gs_err2
if %stage% == 6 set label=horrible_end
if %stage% == 7 set label=horrible_end
:omfgask1
set omfgprompt=q
echo (c)ontinue running the script
echo.
echo (r)econfigure
echo.
echo (q)uit now
echo.
set /p omfgprompt= Choose (default quit):
if /i %omfgprompt%==c goto %label%
if /i %omfgprompt%==r goto configure
if /i %omfgprompt%==q goto horrible_end
goto omfgask1
:lsdbcreate
call :colors 17
set cmdline=
set stage=2
title L2JDP installer - Login Server database setup - DB Creation
echo.
echo Trying to create a Login Server database...
set cmdline="%mysqlPath%" -h %lshost% -u %lsuser% --password=%lspass% -e "CREATE DATABASE %lsdb%" 2^> NUL
%cmdline%
if %ERRORLEVEL% == 0 goto logininstall
if %safe_mode% == 1 goto omfg
:ls_err2
call :colors 47
title L2JDP installer - Login Server database setup - DB Creation error
cls
echo An error occured while trying to create a database for
echo your login server.
echo.
echo Possible reasons:
echo 1-You provided innacurate info , check user, password, etc.
echo 2-User %lsuser% don't have enough privileges for
echo database creation. Check your MySQL privileges.
echo 3-Database exists already...?
echo.
echo Unless you're sure that the pending actions of this tool
echo could work, i'd suggest you to look for correct values
echo and try this script again later.
echo.
:ls_ask2
set omfgprompt=q
echo (c)ontinue running
echo.
echo (r)econfigure
echo.
echo (q)uit now
echo.
set /p omfgprompt= Choose (default quit):
if /i %omfgprompt%==c goto gs_backup
if /i %omfgprompt%==q goto horrible_end
if /i %omfgprompt%==r goto configure
goto ls_ask2
:lsdbok
call :colors 17
title L2JDP installer - Login Server database setup - WARNING!!!
echo.
:asklogin
if %fresh_setup%==0 (
set loginprompt=s
set msg=default skip
) else (
set loginprompt=x
set msg=no default for fresh install
)
echo LOGINSERVER DATABASE install type:
echo.
echo (f)ull: I will destroy data in your `accounts` and
echo and `gameserver` tables.
echo.
echo (s)kip: I'll take you to the gameserver database
echo installation and upgrade options.
echo.
echo (r)econfigure: You'll be able to redefine MySQL path,
echo user and database information and start over with
echo those fresh values.
echo.
echo (q)uit
echo.
set /p loginprompt= Choose (%msg%) :
if /i %loginprompt%==f goto logininstall
if /i %loginprompt%==s goto gs_backup
if /i %loginprompt%==r goto configure
if /i %loginprompt%==q goto end
goto asklogin
:logininstall
set stage=3
call :colors 17
set cmdline=
title L2JDP installer - Login Server database setup - Full install
echo Deleting loginserver tables for new content.
set cmdline="%mysqlPath%" -h %lshost% -u %lsuser% --password=%lspass% -D %lsdb% ^< login_install.sql 2^> NUL
%cmdline%
if not %ERRORLEVEL% == 0 goto omfg
set full=1
goto gs_backup
:gs_backup
call :colors 17
set cmdline=
if %full% == 1 goto fullinstall
set stage=4
title L2JDP installer - Game server database setup
cls
echo.
echo Making a backup of the original gameserver database.
set cmdline="%mysqldumpPath%" --add-drop-table -h %gshost% -u %gsuser% --password=%gspass% %gsdb% ^> "%backup%\gameserver_backup.sql" 2^> NUL
%cmdline%
if %ERRORLEVEL% == 0 goto gsdbok
if %safe_mode% == 1 goto omfg
:gs_err1
call :colors 47
title L2JDP installer - Game Server database setup - Backup failed!
cls
echo.
echo Backup attempt failed! A possible reason for this to happen,
echo is that your DB doesn't exist yet. I could try to create
echo %gsdb% for you, but maybe you prefer me to continue with
echo last part of the script.
echo.
:askgsdb
set gsdbprompt=y
echo ATTEMPT TO CREATE GAMESERVER DATABASE?
echo.
echo (y)es
echo.
echo (n)o
echo.
echo (r)econfigure
echo.
echo (q)uit
echo.
set /p gsdbprompt= Choose (default yes):
if /i %gsdbprompt%==y goto gsdbcreate
if /i %gsdbprompt%==n goto horrible_end
if /i %gsdbprompt%==r goto configure
if /i %gsdbprompt%==q goto end
goto askgsdb
:gsdbcreate
call :colors 17
set stage=5
set cmdline=
title L2JDP installer - Game Server database setup - DB Creation
cls
echo Trying to create Game Server database...
set cmdline="%mysqlPath%" -h %gshost% -u %gsuser% --password=%gspass% -e "CREATE DATABASE %gsdb%" 2^> NUL
%cmdline%
if %ERRORLEVEL% == 0 goto fullinstall
if %safe_mode% == 1 goto omfg
:gs_err2
call :colors 47
title L2JDP installer - Game Server database setup - DB Creation failed!
cls
echo.
echo An error occured while trying to create a database for
echo your game server.
echo.
echo Possible reasons:
echo 1-You provided innacurate info, check username, pass, etc.
echo 2-User %gsuser% don't have enough privileges for
echo database creation.
echo 3-Database exists already...?
echo.
echo I'd suggest you to look for correct values and try this
echo script again later. But you can try to reconfigure it now.
echo.
:askgsdbcreate
set omfgprompt=q
echo (r)estart script with fresh configuration values
echo.
echo (q)uit now
echo.
set /p omfgprompt= Choose (default quit):
if /i %omfgprompt%==r goto configure
if /i %omfgprompt%==q goto horrible_end
goto askgsdbcreate
:gsdbok
call :colors 17
title L2JDP installer - Game Server database setup - WARNING!!!
cls
echo.
:asktype
set installtype=u
echo GAMESERVER DATABASE install:
echo.
echo (f)ull: WARNING! I'll destroy ALL of your existing character
echo data (i really mean it: items, pets.. ALL)
echo.
echo (u)pgrade: I'll do my best to preserve all of your character
echo data.
echo.
echo (s)kip: We'll get into the last set of questions (cummulative
echo updates, experimental stuff...)
echo.
echo (q)uit
echo.
set /p installtype= Choose (default upgrade):
if /i %installtype%==f goto fullinstall
if /i %installtype%==u goto upgradeinstall
if /i %installtype%==s goto experimental
if /i %installtype%==q goto end
goto asktype
Accueil 
Rechercher 
Dernières images 
S'enregistrer 
Connexion 
Ven 7 Déc - 5:25
donc je peut pas continue car sinon mon login server marche pas ^^
